
Rallyâs Marine grade Quick Battery Charger and Maintainer has a selectable charge rate of 2, 4 or 6 amperes and can be used as either a trickle charge or a quick charge with the following: 12 Volt lead-acid batteries, maintenance-free batteries, marine deep cycle batteries and the newer gel batteries that are used in boats, personal watercrafts, cars and more. By means of advanced high frequency microprocessor technology, this item monitors the battery, charges batteries automatically when needed, and then automatically stops the charging process when battery is fully charged; Thus, ensuring a faster and more efficient charge. Other safety and convenience features include: corrosion resistant circuit board and clamps, spark resistant reverse hook-ups to provide overcharge protection, battery clips and ring terminals for temporary or hardwired installation. Charging your battery is an easy task.
Rally 7630 Marine Grade 6 Amp Quick Battery Charger and Maintainer with Microprocessor
Rally 7635 Marine 85W Power Converter with 120V AC Power Outlet, USB Accessory Charge Port with Cover and Swivel Plug

This is a Marine rated 85 Watt Power Inverter that converts your Marine vehicle’s 12 volt power to regular 110 volt household power. This unit has a 120 volt AC power outlet, a USB accessory charge port with cover and maintains 85 watts of continuous power with a 170 watt peak. With a plug that rotates for hard to reach sockets, it is ideal for powering cell phones, PDAs, iPods, radar detectors, laptops, gaming systems, DVD/ CD players and more. It is equipped with a corrosion resistant circuit board, overload and thermal protection, and a low battery shutdown circuit. Additionally, the Marine comes with a 10A replaceable fuse and is backed by a two year warranty.
CyberPower CPS750AI 750 Watt Power Inverter with USB Port

Cyberpower DC to AC Mobile Power Inverter – 750W CPS750AI Power Inverters
Wagan 700 Watt Continuous Power Inverter

It’s portability at it’s best. The Smart AC Inverter allows you to run your small electronics, like laptop computers, mobile appliances and other AC applications from just about anywhere. This unit has two AC receptacles. Continuous Use: 700 Watt, Peak Surge Power: 1800 Watt, AC Voltage Output: 110 Volt, Optimum Efficiency: 90 Percentage, No Load Current Draw: less than 0.95 Ampere, Input Voltage Range: 10 to 15 Volt. Cooling Fan, Low Battery Alarm and Auto Low Battery Shutdown are included.
Sunforce 11230 650 Watt Pure Sine Wave Inverter

The Sunforce 650 Watt Pure Sine Wave Inverter converts 12 Volt DC power into household AC power. Excellent for powering home appliances directly from your 12V battery, this inverter will supply stable power to run small electronic tools, air pumps, electronic doors, small motors and refrigerators that a modified sine wave inverter cannot. Pure Sine Wave inverters provide clean power with very low harmonic distortion, no static or humming noise. Safety features include high and low voltage protection, overload protection and overtemperature protection. This unit comes with an ON/OFF power switch, an LED status indicator and two 110 V AC outlets.
Sunforce 60032 30 Amp Digital Charge Controller

The Sunforce 60032 30 Amp Digital Charge Controller prevents overcharging of 12 volt batteries. It is intended for use with 12 volt solar panels, and can handle up to 30 amps of array current and up to 450 watts of solar power. The controller will continuously display the charging current or battery voltage on the LCD digital meter, and also automatically indicates the charged condition of your battery on the LED bar graph. The 60032 is designed to work with a variety of 12 volt solar panels for indoor use.
Sunforce 60032 30 Amp Digital Charge Controller

The Sunforce 60032 30 Amp Digital Charge Controller prevents overcharging of 12 volt batteries. It is intended for use with 12 volt solar panels, and can handle up to 30 amps of array current and up to 450 watts of solar power. The controller will continuously display the charging current or battery voltage on the LCD digital meter, and also automatically indicates the charged condition of your battery on the LED bar graph. The 60032 is designed to work with a variety of 12 volt solar panels for indoor use.
Sunforce 60032 30 Amp Digital Charge Controller

The Sunforce 60032 30 Amp Digital Charge Controller prevents overcharging of 12 volt batteries. It is intended for use with 12 volt solar panels, and can handle up to 30 amps of array current and up to 450 watts of solar power. The controller will continuously display the charging current or battery voltage on the LCD digital meter, and also automatically indicates the charged condition of your battery on the LED bar graph. The 60032 is designed to work with a variety of 12 volt solar panels for indoor use.


